In this post, we’ll look at the Victony AC1200 Wifi Extender Setup in detail. The Victony dual-band AC1200 wireless extender, which has four external antennas and offers excellent Wi-Fi coverage at home or at work, will be the first thing we study.
You may start using the internet right away thanks to the rapid setup and installation. It supports IEEe802.11a/ac/n/g/b standards, making it compatible with the majority of expander devices on the market. It launches quickly because it is a plug-in and supports WPS.
Victony AC1200 Extender Setup via wps button
To setup your Victony repeater to function with the WPS method, follow these steps:
- Start by connecting the Victony AC1200 Setup to a power outlet beside your router.
- Once it is connected, ensure the power LED is lighted up with a consistent colour.
- Now, a WPS button is required on both your extender and router. Push the button equally on each gadget when you’ve located it.
- The green light on your extender and wireless router or modem will both flash.
- After that, you must wait 10 to 15 seconds for the devices to discover one another.
- The extender’s LED lights will all become solid green when the connection is successful.
- You have now set up your Victony WiFi extender using the WPS button.
- Put the extender where the Wi-Fi signal is weak and disconnect it now.
- Let’s examine the second approach now.
Note:- If you need any assistance regarding you victony ac1200 extender so contact our technician or visit the official website that is ap extender setup.
Victony AC1200 WiFi extender Setup via Web browser
To setup a Victony AC1200 WiFi extender with a browser, follow these steps:
- To begin, attach your WiFi extender to a power supply. You may do it anywhere; your router does not need to be near.
- The extender is turned on and prepared for use once the LED light is solid green. Keep an eye on it.
- Right away, launch the Wi-Fi Manager on a desktop or mobile device. To connect to the network of your extender, use the Wi-Fi Manager. The network won’t likely be secured.
- Open whatever browser you choose and navigate to the URL bar when you have successfully connected to the network. Type ap.setup in the address bar or copy and paste it.
- The final step is to enter your login information, which in both sections is just “admin”. After that, click the “Login” button to be sent to a dashboard. Follow the instructions on the website from here on out to finish the setup.
- And that is how a Victony Wifi extender is simple to set up. And that ends our day.
HOW DO I SET UP MY VICTONY AC1200 EXTENDER CONFIGURATION?
- Connect the Victony AC1200 extender to the same-room modem or WiFi router.
- the power led light of the extender has turned on.
- Grab a Wi-Fi-capable laptop or smartphone.
- Go to the wifi settings menu, then connect to the Victony ac1200 extender setup network.
- Now enter 192.168.10.1 into your web browser’s address bar.
- Your Victony WiFi range extender setup page has now been reached.
- Connect your extender to your home’s router or modem by following the on-screen instructions.
Victony ac1200 extender firmware update
Do you know anything about the firmware? If not, we will inform you. In reality, firmware is a hybrid of hardware and software. The firmware is a collection of software that is built into hardware. To solve the issue your extender is causing, you will sometimes need to upgrade the firmware on victony extenders. These issues might relate to performance or data protection.
- Turn on your victony extender first.
- Take any smartphone.
- Visit ap.setup today.
- Select Settings from the menu.
- Click the Firmware Update button now.
- To finish the upgrading procedure, adhere to the on-screen directions.
- For the duration of the process, keep your booster plugged in.
- These directions will let you upgrade the firmware on your victony extender.
What is the Victony wifi Extender’s reset procedure?
- Before attempting to restore the Victony AC1200 extender to its factory default settings, make sure it is connected to a power outlet properly.
- Next, find the pinhole on the repeater that typically receives the factory reset pin.
- And then press and hold the reset button, which is within the hole, for 10 to 15 seconds using a paper clip or toothpick.
- After you reset the wireless booster, the power led light will become amber.
- Wait until the power LED is entirely green before proceeding.
- The instructions above should be followed to reconfigure the Victony WIFI extender.